by Fenton Webb
Here is a complete listing of all the available commands in AutoCAD OEM 2013; remember, there are differences between full AutoCAD and AutoCAD OEM…
Commands A-D
| _3d | Creates three-dimensional polygon mesh objects |
| _3dalign | Dynamically aligns objects with other objects in 3D |
| _3darray | Creates a three-dimensional array |
| _3dclip | Invokes the 3DORBIT command and opens the Adjust Clipping Planes window |
| _-3dconfig | Provides a command-line interface to the 3D graphics system's configuration settings |
| _3dconfig | Provides a command line interface to the 3D graphics system's configuration settings |
| 3dconversionmode | Used to convert material and light definitions to the current product release |
| _3dcorbit | Starts the interactive 3D view and enables you to set the objects in the 3D view into continuous motion |
| _3ddistance | Starts the interactive 3D view and makes objects appear closer or farther away |
| _3ddwf | Creates a 3D DWF file of your three-dimensional model and displays it in the DWF Viewer |
| 3ddwfprec | Controls the precision of 3D DWF publishing. |
| _3ddwfpublish | Creates a 3D DWF file of your three-dimensional model and displays it in the DWF Viewer |
| _3deditbar | Edits a NURB surface by selecting a point on the surface |
| _3dface | Creates a three-dimensional face |
| _3dfly | Interactively changes your view of a 3D drawings so that you appear to be flying through the model |
| _3dforbit | Controls the interactive viewing of objects in 3D |
| _3dmesh | Creates a free-form polygon mesh |
| _3dmove | Displays the move grip tool in 3D space and moves objects a specified distance in a specified direction |
| _3dorbit | Controls the three-dimensional view of objects |
| _3dorbittransparent | Invokes the 3DORBIT command transparently |
| _3dorbitctr | starts 3D Orbit view and uses a center of rotation that you specify with your pointing device. |
| 3dosmode | Controls the settings for the 3D object snaps |
| _-3dosnap | Sets running object snap modes and changes the target box size |
| _3dosnap | Sets running object snap modes and changes the target box size |
| _3dpan | Invokes the 3DORBIT command and allows you to move objects in the view |
| _3dpan2 | Internal command to be used to panning and without putting it into command history |
| _3dpantransparent | Invokes the 3DORBIT command transparently and allows you to move objects in the view |
| _3dpoly | Creates a polyline of straight line segments in three-dimensional space |
| _3dprint | Sends a 3D model to a 3D printing service. |
| _3drotate | Displays the rotate grip tool in 3D space and revolves objects around a base point |
| 3dselectionmode | Controls the selection precedence of visually overlapping objects when using 3D visual styles |
| _3dscale | Displays the scale grip tool in 3D space and scales objects around a base point |
| _3dsin | Imports a 3D Studio (3DS) file |
| _3dswivel | Invokes the 3DORBIT command and simulates the effect of turning the camera |
| _3dswiveltransparent | Invokes the 3DORBIT command transparently and simulates the effect of turning the camera |
| _3dwalk | Interactively changes your view of a 3D drawings so that you appear to be walking through the model |
| _3dzoom | Invokes the 3DORBIT command and allows you to zoom in and out on the view |
| _3dzoom2 | Like 3dZoom but without command history |
| _3dzoomtransparent | Invokes the 3DORBIT command transparently and allows you to zoom in and out on the view |
| _about | Displays information about AutoCAD OEM |
| _acadblockdialog | Displays the BLOCK dialog |
| acadlspasdoc | Controls whether aoem.lsp loads into every drawing or just the first drawing opened in an AutoCAD OEM session. |
| _acadwblockdialog | Displays the WBLOCK dialog |
| _acdcinsertblock | Insert DesignCenter block |
| _acgzdragaction | Enables the gizmo dragger functionality |
| _acisin | Imports an ACIS file |
| _acisout | Exports solid objects to an ACIS file |
| _actbasepoint | Inserts a base point in an action macro. |
| actpath | Specifies the additional paths to use when locating available action macros for playback. |
| _actmdragaction | Enables the custom dragger functionality |
| _actmanager | Manages action macro files. |
| _actrecord | Starts the Action Recorder. |
| actrecorderstate | Specifies the current state of the Action Recorder. |
| actrecpath | Specifies the path used to store new action macros. |
| _-actstop | Stops the Action Recorder and provides the option of saving the recorded actions to an action macro file |
| _actstop | Stops the Action Recorder and provides the option of saving the recorded actions to an action macro file |
| actui | Controls the behavior of the Action Recorder panel when recording and playing back macros. |
| _actuserinput | Pauses for user input in an action macro. |
| _-actusermessage | Inserts a user message into an action macro. |
| _actusermessage | Inserts a user message into an action macro. |
| _acucseditaction | Internal use command to do UCS dragging functionality |
| _addselected | Create a new object with the same object type as a selected object |
| _adjust | Allows adjustment of DWF underlays |
| _-aecdwgunits | Support for AEC object enabler functionality |
| _-aecexporttoautocad | Support for AEC object enabler functionality |
| _aecdisplaymanagerconfigsselection | Support for AEC object enabler functionality |
| _aecfileopenmessage | Support for AEC object enabler functionality |
| _aecfilesavemessage | Support for AEC object enabler functionality |
| _aecobjectcopymessage | Support for AEC object enabler functionality |
| _aecobjreldump | Support for AEC object enabler functionality |
| _aecobjrelshow | Support for AEC object enabler functionality |
| _aecobjrelupdate | Support for AEC object enabler functionality |
| _aecpostdxfinfix | Support for AEC object enabler functionality |
| _aecsetxrefconfig | Support for AEC object enabler functionality |
| _aecversion | Support for AEC object enabler functionality |
| _adc | DesignCenter |
| _adcclose | Closes Design Center |
| _adcenter | Manages content |
| _adcnavigate | Loads a specified DesignCenter drawing file |
| _adccustomnavigate | Use a custom application to load DesignCenter content |
| adcstate | System variable to determine whether AutoCAD DesignCenter is active or not |
| _advsetupwiz | Advanced setup wizard |
| aflags | Sets options for attributes |
| _aidimfliparrow | Dimension precision |
| _aidimprec | Dimension precision |
| _aidimstyle | Dimension utility to handle dimstyles |
| _aidimtextmove | Dimension utility to allow user to move dimension text |
| _aimleadereditadd | Menu utility to add a leader line to an existing multileader object. |
| _aimleadereditremove | Menu utility to removes a leader line from an existing multileader object. |
| _aiobjectscaleadd | Menu utility to add object scale |
| _aiobjectscaleremove | Menu utility to remove object scale |
| _ai_box | Create 3Dmesh box |
| _ai_close | AutoLISP helper routines for menu |
| _ai_cone | Create 3Dmesh cone |
| _ai_dim_textabove | AutoLISP helper routines for menu |
| _ai_dim_textcenter | AutoLISP helper routines for menu |
| _ai_dim_texthome | AutoLISP helper routines for menu |
| _ai_dish | Create 3Dmesh bottom half of sphere |
| _ai_dome | Create 3Dmesh top half of sphere |
| _ai_deselect | AutoLISP helper routines for menu |
| _ai_draworder | AutoLISP helper routines for menu |
| _ai_editcustfile | AutoLISP helper routines for menu |
| _ai_emptyprinc | Menu Helper command to eliminate (princ) from menu macros |
| _ai_hideedge_alert | AutoLISP helper routines for menu |
| _ai_mesh | Tool to help create 3dmesh |
| _ai_molc | Utility to make an object's layer current |
| _ai_open | AutoLISP helper routines for menu |
| _ai_pan | AutoLISP helper routines for menu |
| _ai_publish | Menu utility for publish |
| _ai_pyramid | Create 3Dmesh pyramid |
| _ai_refedit_alert | AutoLISP helper routines for menu |
| _ai_selall | Menu helper function |
| _ai_showedge_alert | AutoLISP helper routines for menu |
| _ai_sphere | Create 3Dmesh sphere |
| _ai_startapp | AutoLISP helper routines for menu |
| _ai_tiledvp | AutoLISP helper routines for menu |
| _ai_tiledvp_chk | AutoLISP helper routines for menu |
| _ai_torus | Create 3Dmesh torus |
| _ai_viewports_alert | Alert utility for viewports |
| _ai_wedge | Create 3Dmesh wedge |
| _align | Moves and rotates objects to align with other objects |
| _allplay | Plays all named views in current drawing. |
| _ameconvert | Converts AME solid models to solid objects |
| _analysiscurvature | Evaluates areas of high and low surface curvature using a color gradient display on surface parts |
| _analysisdraft | Evaluates if a model has adequate draft between a part and it’s mold |
| _analysisoptions | Launches the “Analysis Options” dialog |
| _analysiszebra | Analyzes surface continuity by projecting stripes onto the model |
| angbase | Sets the base angle to 0 with respect to the current UCS. |
| angdir | Sets the positive angle direction from angle 0 with respect to the current UCS. |
| _anipath | Saves an animation along a path in a 3D model |
| annoallvisible | Hides or displays annotative objects that do not support the current annotation scale |
| annoautoscale | Updates annotative objects to support the annotation scale when the annotation scale is changed |
| annomonitor | Turns the Annotation Monitor on or off |
| *annoselected | Setvar used by menus to detect whether the object selected is annotative. |
| annotativedwg | Specifies whether or not the drawing will behave as an annotative block when inserted into another drawing |
| _annoreset | Resets the location of all scale representations for an annotative object to that of the current scale representation |
| _annoupdate | Updates existing annotative objects to match the current properties of their styles |
| apbox | Turns the AutoSnap aperture box on or off. The aperture box is displayed in the center of the crosshairs when you snap to an object. |
| _aperture | Controls the size of the object target box |
| *appstatusbarstate | System variable to determine whether the application status bar is hidden or shown. |
| *appstatusbaruseicons | System variable to determine whether to show or hide the status bar iconds |
| _appload | Loads AutoLISP ADS and ARX applications |
| *apstate | Read-only sysvar for Author Palette Window's state |
| _arc | Creates an arc |
| _-archive | Packages the current sheet set files for archival |
| _archive | Packages the current sheet set files for archival |
| _area | Calculates the area and perimeter of objects or of defined areas |
| _array | Creates multiple copies of objects in a pattern |
| arrayassociativity | Specifies the default associativity of array to be created |
| _arrayclassic | Legacy array command to invoke legacy array dialog |
| _arrayclose | Saves back or discards changes made to the source object(s) of the array |
| _arrayedit | Edits multiple copies of objects in a pattern |
| arrayeditstate | Indicates whether drawing array is in an in-place edit state for source objects |
| _arraypath | Creates multiple copies of objects in a pattern defaulting to the Path type |
| _arraypolar | Creates multiple copies of objects in a pattern defaulting to the Polar type |
| _arrayrect | Creates multiple copies of objects in a pattern defaulting to the Rectangular type |
| arraytype | Indicates default array type (Rectangular |
| _-array | Creates multiple copies of objects in a pattern from command line |
| _-arrayclose | Saves back or discards changes made to the source object(s) of the array |
| _arx | Loads unloads and provides information about ARX applications |
| _-attach | Allows the user to insert various file types as attachments or underlays into a DWG file from the command line. |
| _attach | Allows the user to insert various file types as attachments or underlays into a DWG file |
| _attachurl | Attaches a URL to an object or an area |
| _attdef | Creates an attribute definition |
| _-attdef | Creates an attribute definition from command line |
| attdia | Controls whether the -INSERT command uses a dialog box for attribute value entry |
| _attdisp | Globally controls attribute visibility |
| _attedit | Changes attribute information |
| _-attedit | Changes attribute information from command line |
| _attext | Extracts attribute data |
| _-attext | Extracts attribute data from command line |
| attipe | Controls the display of the in-place editor used to create multiline attributes. |
| _attipedit | Changes the textual content of an attribute within a block |
| attmode | Controls display of attributes |
| attmulti | Controls whether multiline attributes can be created. |
| _attredef | Redefines a block and updates associated attributes |
| attreq | Determines whether the INSERT command uses default attribute settings during insertion of blocks |
| _attsync | Updates all instances of a specified block with the current attributes defined for the block |
| _audit | Evaluates the integrity of a drawing |
| auditctl | Controls whether the AUDIT command creates an audit report (ADT) file. |
| aunits | Sets units for angles. |
| auprec | Sets the number of decimal places displayed for all read-only angular units |
| _autocomplete | Allows user to set settings for AutoComplete feature |
| autocompletemode | Bitmask flags that control behavior of AutoComplete feture |
| autocompletedelay | Sets the delay for when the Suggestion List will show up |
| _autoconstrain | Applies geometric constraints to a selection set of objects based on orientation of the objects relative to one another. |
| automaticpub | Controls whether the AutoPublish feature is on or off |
| _autopublish | Specifies options for publishing automatically. |
| autosnap | Controls AutoSnap marker |
| auxstat | Used for Auxiliary Menus |
| _background | Sets up the background for your view. |
| backgroundplot | Controls whether background plotting is turned on or off. |
| backz | Stores the back clipping plane offset from the target plane for the current viewport |
| _baction | Creates an action object |
| _bactionbar | Displays or hides action bars for a selection set of parameters objects |
| bactionbarmode | Controls whether action bars or legcy action objects are displayed in the Block Editor |
| bactioncolor | Sets the color of actions in the Block Editor. |
| _bactionset | Specifies the selection set of objects associated with an action object |
| _bactiontool | Adds an action to a dynamic block definition |
| banner | The OEM developer banner lines. |
| _base | Sets the insertion base point for the current drawing |
| _bassociate | Associates an action object with a parameter |
| _battman | Block Attribute Manager |
| _battorder | Specifies the order of attributes for a block |
| _bauthorpalette | Opens the Tool Palettes window. |
| _bauthorpaletteclose | Opens the Tool Palettes window. |
| _bclose | Closes the Block Editor |
| _bconstruction | Converts geometry into construction geometry. |
| bconstatusmode | Controls color overrides of underconstrained geometry |
| _-bcparameter | Creates constraint parameters in the Block Editor. |
| _bcparameter | Applies constraint parameters to selected objects or converts dimensional constraints to parameter constraints |
| bdependencyhighlight | Controls whether or not dependent objects are highlighted when a parameter |
| _-bedit | Edit a block definitation on the command line. |
| _bedit | Opens the block definition in the Block Definition Editor |
| _besettings | Starts the Block Editor Settings dialog |
| _bgplotreceive | Used by the publish command for doing background plots. |
| bgrdplottimeout | Specifies the timeout value for background plot |
| bgripobjcolor | Sets the color of grips in the Block Editor. |
| bgripobjsize | Sets the relative size of grips in the Block Editor. |
| _bcycleorder | Changes the cycling order of grips |
| _bgripset | Creates |
| _bhatch | Fills an enclosed area with a hatch pattern |
| _-bhatch | Fills an enclosed area with a hatch pattern from command line |
| bindtype | Controls how xref names are handled when binding xrefs or editing xrefs in place. |
| _blend | The command creates a spline object that is G1 (tangent) or G2 (smooth) continuous between two curves. |
| _blipmode | Controls display of marker blips for point selection |
| _block | Creates a block definition from selected objects |
| _-block | Creates a block definition from selected objects from command line |
| blockeditlock | Disallows opening of Block Editor and editing of dynamic block definitions. |
| blockeditor | Reflects whether or not the Block Editor is open. |
| _blockicon | Generates preview images |
| blocktestwindow | Indicates whether the test block window is current. |
| _blookuptable | Displays the Property Lookup Table dialog box. |
| _bmake | Allows creation of new block |
| _bmod | Allows modification of existing block |
| _bmpout | Saves selected objects to a file in device-independent bitmap format |
| _bparameter | Adds a parameter with grips to a dynamic block definition |
| bparametercolor | Sets the color of parameters in the Block Editor. |
| bparameterfont | Sets the font used for parameters and actions in the Block Editor. |
| bparametersize | Sets the relative size of parameter text and features in the Block Editor. |
| bptexthorizontal | Forces the text display for dimensional constraints to horizontal. |
| _btestblock | Test a dynamic block in a "Block Test" window. |
| _boundary | Creates a region or a polyline from an enclosed area |
| _-boundary | Creates a region or a polyline from an enclosed area from command line |
| _box | Creates a three-dimensional solid box |
| _bpoly | See boundary |
| _break | Erases parts of objects or splits an object in two |
| _brep | Changes 3D solid primitives and composite solids to Brep solids |
| _browser | Launches the default Web browser defined in your system’s registry |
| _browser2 | Launches the default Web browser defined in your system’s registry |
| _bsave | Saves the current block definition |
| _bsaveas | Saves a copy of the current block definition under a new name |
| _btable | Displays a dialog with a grid control for defining different variations of the block |
| btmarkdisplay | Sets the relative size of parameter text and features in the Block Editor. |
| _-bvhide | Hides objects in the current visibility state or all visibility states in a dynamic block definition |
| _bvhide | Hides objects in the current visibility state or all visibility states in a dynamic block definition |
| bvmode | Sets the relative size of parameter text and features in the Block Editor. |
| _-bvshow | Makes objects visible in the current visibility state or all visibility states in a dynamic block definition |
| _bvshow | Makes objects visible in the current visibility state or all visibility states in a dynamic block definition |
| _-bvstate | Creates |
| _bvstate | Creates |
| cachemaxfiles | Controls the maximum number of files in the graphics cache |
| cachemaxtotalsize | Controls the maximum total size of all files in the graphics cache |
| _cal | Evaluates mathematical and geometric expressions |
| calcinput | Controls whether mathematical expressions can be entered in a dialog box. |
| _camera | Sets the camera and target location |
| cameradisplay | Toggles the display of camera objects in the current drawing. |
| cameraheight | Specifies the default height for newly created camera objects. |
| cannoscale | Sets the name of the current annotation scale for the current space |
| cannoscalevalue | Returns the value of the current annotation scale |
| capturethumbnails | Specifies if and when thumbnails are captured for the Rewind tool when a legacy navigation tool is used to change the current view. |
| cbartransparency | Controls the transparency of constraintbars |
| cconstraintform | Controls whether annotational or dynamic constraints are applied to objects. |
| cdate | Sets calendar date and time. |
| cecolor | Sets the color of new objects. |
| _cellselect | Inernal command used to when changing the cell section using the arrow keys. |
| celtscale | Sets the current object linetype scaling factor. |
| celtype | Sets the linetype of new objects. |
| celweight | Sets the lineweight of new objects. |
| centermt | Controls stretching of Centered MTEXT. |
| cetransparency | Sets the transparency of new objects. |
| _chamfer | Bevels the edges of objects |
| chamfera | Sets the first chamfer distance. |
| chamferb | Sets the second chamfer distance. |
| chamferc | Sets the chamfer length. |
| chamferd | Sets the chamfer angle. |
| _chamferedge | Bevels the edges of solid and surface objects |
| chammode | Sets the input method by which AutoCAD creates chamfers. |
| _change | Changes the properties of existing objects |
| _checkstandards | Checks the current drawing for standards violations |
| _chprop | Changes the color |
| _chspace | Moves objects from model space to paper space |
| _circle | Creates a circle |
| circlerad | Sets the default circle radius. A zero indicates no default. |
| _classicgroup | Legacy group command |
| _classicimage | Inserts images in many formats into an AutoCAD OEM drawing file |
| _classiclayer | Layer Properties Manager |
| _classicxref | Controls external references to drawing files |
| clayer | Sets the current layer. |
| _cleanscreenoff | Restores window borders and toolbars. |
| _cleanscreenon | Hides window borders and toolbars to maximize drawing area. |
| cleanscreenstate | Displays the clean screen state (read only). |
| clipboard | Indicates the status of the Windows Clipboard. |
| clipromptlines | Set the line count of temporary prompt. |
| clipromptupdate | Determine whether CLI is updated during running a command/LISP routine |
| *clistate | Command line window state. |
| _clip | Allows the user to clip Viewports XREFs |
| _close | Closes the active drawing |
| _closeall | Closes all drawings |
| cmaterial | Sets the current material. |
| cmdactive | Stores the bitcode that indicates whether an ordinary command |
| cmddia | Controls whether dialogs are displayed for certain commands |
| cmdecho | Controls whether AutoCAD echoes prompts and input during the AutoLISP command function. |
| cmdinputhistorymax | Sets the maximum number of previous input values that are stored for a prompt in a command. |
| cmdnames | Displays the names of the active and transparent commands. |
| cmleaderstyle | Sets the name of the current multileader style |
| cmljust | Specifies multiline justification. |
| cmlscale | Controls the overall width of a multiline. |
| cmlstyle | Sets the multiline style that AutoCAD uses to draw the multiline. |
| _color | Sets the color for new objects |
| _-color | Sets the color for new objects from command line |
| _commandline | Displays the command line when it’s been hidden. |
| _commandlinehide | Hides the command line. When the command line is hidden |
| compass | Controls whether the 3D compass is on or off in the current viewport. |
| _compile | Compiles shape files and PostScript font files |
| _cone | Creates a three-dimensional solid cone |
| _config | Configures input and output devices |
| _constraintbar | A toolbar-like UI element that displays the available geometric constraints on an object. |
| constraintbarmode | Controls the display of geometrical constraints on constraint bars. |
| constraintbardisplay | Displays constraint bars for selecting objects after applying a constraint or after running the AUTOCONSTRAIN command or when selecting constrained objects |
| constraintinfer | Controls whether the geometric constraints are inferred while drawing and editing geometry. |
| constraintnameformat | Controls the text format for dimensional constraints. |
| constraintrelax | Indicates whether constraints are enforced or relaxed when editing an object. |
| _constraintsettings | Controls the display of geometric constraints on constraint bars |
| _+constraintsettings | Open the constraint settings dialog with specified tab index. |
| constraintsolvemode | Controls constraint behavior when applying or editing constraints. |
| _content | Launches AutoCAD DesignCenter |
| _convert | Converts 2D polylines and associative hatches to the optimized Release 14 format |
| _convertctb | Converts color-dependent plot style tables into named plot style tables |
| _convertpstyles | Converts a drawing to use named plot styles |
| _convertpoly | Converts existing polylines to be old or new style (lightweight) polylines |
| _convertoldlights | Converts lights created in previous drawing file formats to the current format. |
| _convertoldmaterials | Converts materials created in previous drawing file formats to the current format. |
| _convtonurbs | Converts entities to a NURBS surface |
| _convtosolid | Converts polylines and cirles with thickness to 3D solids |
| _convtosurface | Converts objects to surfaces |
| coords | Controls when coordinates are updated on the status line. |
| _copy | Duplicates objects |
| _copybase | Copies objects with a specified basepoint |
| _copyclip | Copies objects to the Clipboard |
| _copyhist | Copies the text in the command line history to the Clipboard |
| _copylink | Copies the current view to the Clipboard for linking to other OLE applications |
| copymode | Controls whether the COPY command repeats automatically. |
| _copytolayer | Copies selected objects to a different layer |
| _-copytolayer | Copies selected objects to a different layer |
| cplotstyle | Controls the current plot style for new objects. |
| cprofile | Displays the name of the current profile. |
| crossingareacolor | Controls the color of the transparent selection area during crossing selection. |
| cshadow | Sets the shadow display property for a 3D object. To be visible |
| ctab | Returns the name of the current (model or layout) tab in the drawing. |
| ctablestyle | Sets the name of the current table style. |
| _cui | Opens the Customize User Interface dialog box |
| _cuiexport | Opens the Customize User Interface dialog box |
| _cuiimport | Opens the Customize User Interface dialog box |
| _cuiload | Opens the Customize User Interface dialog box |
| _cuiunload | Opens the Customize User Interface dialog box |
| cullingobj | Controls whether 3D subobjects that are hidden from view can be highlighted or selected. |
| cullingobjselection | Controls whether 3D objects that are hidden from view can be highlighted or selected. |
| cursorsize | Determines the size of the crosshairs as a percentage of the screen size. |
| _customize | Displays |
| _+customize | Displays |
| _cutclip | Copies objects to the Clipboard and erases the objects from the drawing |
| _cvadd | Adds control vertices on a spline or a row of control vertices for a NURBS surface. |
| _cvhide | Turns off the control vertices for all NURBS surfaces or splines |
| _cvrebuild | Lets the user rebuild NURBS surfaces or SPLINEs to have more or less control vertices or to change the degree of these object types. |
| _-cvrebuild | Lets the user rebuild NURBS surfaces or SPLINEs to have more or less control vertices or to change the degree of these object types. |
| _cvremove | Removes control vertices on a spline or a row of control Vertices for a NURBS surface |
| _cvshow | Displays control vertices for selected NURBS surfaces or splines |
| cvport | Sets the identification number of the current viewport. |
| _cylinder | Creates a three-dimensional solid cylinder |
| date | Stores the current date and time |
| *dashboardstate | Indicates whether the Dashboard window is active or not. |
| _-dataextraction | Extracts drawing data and merges data from an external source to a data extraction table or external file. |
| _dataextraction | Extracts drawing data and merges data from an external source to a data extraction table or external file. |
| _datalink | Creates |
| datalinknotify | Controls the notification for updated or missing data links |
| _datalinkupdate | Updates data to or from an established external data link. |
| _dbcClose | Closes the dbConnect Manager and removes the dbConnect menu from the menu bar |
| _dbcconfigure | Displays the _dbcconfigure Manager. |
| _dbcConnect | Displays the dbConnect Manager and adds the dbConnect menu to the menu bar. |
| _dbcDefineLLT | Creates a new label template in the current drawing |
| _dbcDefineLT | Creates a new link template in the current drawing |
| _dbcDeleteLabels | Deletes all labels based on a particular label template from the current drawing |
| _dbcDeleteLinks | Deletes all links based on a particular link template from the current drawing |
| _dbcDeleteLLT | Deletes a label template from the current drawing |
| _dbcDeleteLT | Deletes a link template from the current drawing |
| _dbcDeleteQry | Deletes a query from the current drawing |
| _dbcEditLinkedTable | Opens an external database table in Edit mode |
| _dbcEditLLT | Edits an existing label template |
| _dbcEditLT | Edits an existing link template |
| _dbcEditQry | Edits an existing query |
| _dbcEditTable | Opens an external database table in Edit mode |
| _dbcExecuteQry | Executes a stored query |
| _dbcExportLinks | Exports all links based on a particular link template from the current drawing |
| _dbcExportQS | Exports a set of queries from the current drawing |
| _dbcExportTS | Exports a set of templates from the current drawing |
| _dbcHideLabels | Turns off label visibility of a selected label template |
| _dbcImportQry | Imports an existing query |
| _dbcImportQS | Imports a set of queries into the current drawing |
| _dbcImportTS | Imports a set of templates into the current drawing |
| _dbcLinkConversion | Converts links from previous releases |
| _dbcLinkManager | Edits the key values of a selected link |
| _dbcNewQryLT | Creates a new query in the current drawing |
| _dbcNewQryTable | Creates a new query in the current drawing |
| _dbConnect | Establishes a connection to an external data source |
| _dbcPropsLblT | Modifies the properties of a label template |
| _dbcPropsLT | Modifies the properties of a link template |
| _dbcReloadLabels | Refreshes all labels based on a particular label template with new database table values |
| _dbcSelectLinks | Performs a Link Select operation |
| _dbcShowLabels | Turns on label visibility of a selected label template |
| _dbcSync | Detects broken links in the current drawing |
| _dbcViewLinkedTable | Opens an external database table in Read-only mode |
| _dbcViewTable | Opens an external database table in Read-only mode |
| dblclkedit | Controls double-click behavior |
| dbcstate | dbConnect active state |
| _dblist | Lists database information for each object in the drawing |
| dbmod | Indicates the drawing modification status using bitcode. |
| _dcaligned | Dimensional constraint |
| _dcangular | Dimensional constraint |
| _dcconvert | Dimensional constraint |
| _dcdiameter | Dimensional constraint |
| _dcdisplay | Displays or hides the dynamic constraints associated with a selection set of objects. |
| _dcform | Dimensional constraint |
| _dchorizontal | Dimensional constraint |
| _dclinear | Dimensional constraint |
| _dcradius | Dimensional constraint |
| dctcust | Displays the path and file name of the current custom spelling dictionary. |
| dctmain | Displays the path and file name of the current main spelling dictionary. |
| _dcvertical | Dimensional constraint |
| _ddatte | Attribute edit |
| _ddedit | Edits text and attribute definitions |
| _ddim | Dimension settings |
| _ddinsert | Inserts a block or another drawing |
| _ddplotstamp | Places a plot stamp on a specified corner of each drawing and/or logs it to a file |
| _ddptype | Specifies the display mode and size of point objects |
| _ddstyle | Displays dialog box for the STYLE command |
| _dducs | UCS control |
| _ddunits | Displays dialog box for the UNITS command |
| _ddview | Saves and restores named views |
| defaultgizmo | Controls what type of gizmo (move |
| _ddvpoint | Sets the three-dimensional viewing direction |
| defaultlighting | Turns default lighting on and off in the current viewport. |
| defaultlightingtype | Specifies the type of default lighting. |
| deflplstyle | Specifies the default plot style for new objects. |
| defplstyle | Specifies the default plot style for new objects. |
| _delay | Provides a timed pause within a script |
| _delconstraint | Removes all geometric and dimensional constraints from a selection set of objects. |
| delobj | Controls whether objects used to create other objects are retained or deleted from the drawing database. |
| demandload | Specifies if and when AutoCAD demand loads a third-party application if a drawing contains custom objects created in that application. |
| _detachurl | Detaches a URL from an object or area |
| _dgnadjust | Allows adjustment of a DGN underlay from the command line |
| _-dgnattach | DGNATTACH displays prompts on the command line |
| _dgnattach | Attaches a DGN underlay to the current drawing |
| _-dgnbind | DGNBIND displays prompts on the command line |
| _dgnclip | Uses clipping boundaries to define a subregion of a DGN underlay |
| _-dgnexport | Creates one or more V8 DGN files from the current drawing |
| _dgnexport | Creates one or more V8 DGN files from the current drawing |
| dgnframe | Determines whether the DGN frame is visible. |
| _-dgnimport | Imports the data from a V8 DGN file into a new DWG file |
| _dgnimport | Imports the data from a V8 DGN file into a new DWG file |
| dgnimportmax | Controls the maximum number of elements that are translated during DGNIMPORT. |
| dgnimportmode | Determines whether to import the DGN file into the currently open drawing |
| _dgnlayers | Imports the data from a V8 DGN file into a new DWG file |
| _dgnmapping | Opens the DGN Mapping Setups Manager |
| dgnmappingpath | Stores the location of the DGNSetups.INI file where DGN mapping setups are stored. |
| dgnosnap | Determines whether object snapping is active for DGN underlays which are attached to the drawing. |
| diastat | Stores the exit method of the most recently used dialog box. |
| _dim | Accesses dimensioning mode |
| _dim1 | Makes dim sub-prompt active |
| dimadec | Controls the number of precision places displayed in angular dimensions. |
| _dimaligned | Creates an aligned linear dimension |
| dimalt | Controls the display of alternate units in dimensions. |
| dimaltd | Controls the number of decimal places in alternate units. |
| dimaltf | Controls the multiplier for alternate units. |
| dimaltrnd | Rounds off the alternate dimension units. |
| dimalttd | Sets the number of decimal places for the tolerance values in the alternate units of a dimension. |
| dimalttz | Toggles suppression of zeros in tolerance values. |
| dimaltu | Sets the units format for alternate units of all dimension style family members except angular. |
| dimaltz | Controls the suppression of zeros for alternate unit dimension values |
| _dimangular | Creates an angular dimension |
| dimanno | Indicates whether or not the current dimension style is annotative. |
| dimapost | Specifies a text prefix or suffix (or both) to the alternate dimension measurement for all types of dimensions except angular. |
| _dimarc | Creates an arc length dimension |
| dimarcsym | Controls display of the arc symbol in an arc length dimension. |
| dimaso | Controls the associativity of dimension objects. |
| dimassoc | Controls creation of associative dimensions |
| dimasz | Controls the size of dimension line and leader line arrowheads. |
| dimatfit | Determines how dimension text and arrows are arranged when space is not sufficient to place both within the extension lines. |
| dimaunit | Sets the units format for angular dimensions. |
| dimazin | Suppresses zeros for angular dimensions. |
| _dimbaseline | Continues a linear angular or ordinate dimension from the baseline of the previous or selected dimension |
| dimblk | Sets the arrowhead block displayed at the ends of dim |
| dimblk1 | Sets the arrowhead for the first end of the dimension line when DIMSAH is on. |
| dimblk2 | Sets the arrowhead for the second end of the dimension line when DIMSAH is on. |
| _dimbreak | Adds or removes a dimension break |
| dimcen | Controls drawing of circle or arc center marks and centerlines. |
| _dimcenter | Creates the center mark or the center lines of circles and arcs |
| dimclrd | Assigns colors to dimension lines |
| dimclre | Assigns colors to dimension extension lines. |
| dimclrt | Assigns colors to dimension text. |
| _dimconstraint | Applies dimensional constraints to selected objects |
| dimconstrainticon | Displays the lock icon next to the text for dimensional constraints |
| _dimcontinue | Continues a linear angular or ordinate dimension from the second extension line of the previous or a selected dimension |
| dimdec | Sets the number of decimal places displayed for the primary units of a dimension. |
| _dimdiameter | Creates diameter dimensions for circles and arcs |
| _dimdisassociate | Allows users to disassociate associative dimensions |
| dimdle | Sets the distance the dimension line extends beyond the extension line when oblique strokes are drawn instead of arrowheads. |
| dimdli | Controls the spacing of the dimension lines in baseline dimensions. |
| dimdsep | Specifies a single-character decimal separator to use when creating dimensions whose unit format is decimal. |
| _dimedit | Edits dimensions |
| dimexe | Specifies how far to extend the extension line beyond the dimension line. |
| dimexo | Specifies how far extension lines are offset from origin points. |
| dimfit | Obsolete. Has no effect in AutoCAD 2000 except to preserve the integrity of pre-AutoCAD 2000 scripts and AutoLISP routines. |
| dimfrac | Sets the fraction format when DIMLUNIT |
| dimfxl | Sets the total length of the extension lines starting from the dimension line toward the dimension origin. |
| dimfxlon | Controls whether extension lines are set to a fixed length |
| dimgap | Sets the distance around the dimension text when the dimension line breaks to accommodate dimension text. |
| _dimhorizontal | Horizontal dimension |
| _-diminspect | Create or remove inspection dimensions using the command line. |
| _diminspect | Create or remove inspection dimensions |
| dimjogang | Determines the angle of the transverse segment of the dimension line in a jogged radius dimension. |
| _dimjogged | Creates jogged radius dimensions |
| _dimjogline | Adds or removes a jog line to a linear or aligned dimension |
| dimjust | Controls the horizontal positioning of dimension text. |
| dimldrblk | Specifies the arrow type for leaders. |
| dimlfac | Sets a scale factor for linear dimension measurements. |
| dimlim | Generates dimension limits as the default text. |
| _dimlinear | Creates linear dimensions |
| dimltex1 | Sets the linetype of the first extension line. |
| dimltex2 | Sets the linetype of the second extension line |
| dimltype | Sets the linetype of the dimension line. |
| dimlunit | Sets units for all dimension types except Angular. |
| dimlwd | Assigns lineweight to dimension lines. |
| dimlwe | Assigns lineweight to extension lines. |
| _dimordinate | Creates ordinate point dimensions |
| _dimoverride | Overrides dimension system variables |
| dimpost | Specifies a text prefix or suffix (or both) to the dimension measurement. |
| _dimradius | Creates radial dimensions for circles and arcs |
| _dimreassociate | Allows users to associate non-associative dimensions |
| _dimregen | Forces a regeneration of all associative dimensions |
| dimrnd | Rounds all dimensioning distances to the specified value. |
| _dimrotated | Rotated dimension |
| dimsah | Controls the display of dimension line arrowhead blocks. |
| dimscale | Sets the overall scale factor applied to dimensioning variables that specify sizes |
| dimsd1 | Controls suppression of the first dimension line. |
| dimsd2 | Controls suppression of the second dimension line. |
| dimse1 | Suppresses display of the first extension line. |
| dimse2 | Suppresses display of the second extension line. |
| dimsho | Controls redefinition of dimension objects while dragging. |
| dimsoxd | Suppresses drawing of dimension lines outside the extension lines. |
| _dimspace | Creates and modifies dimension styles |
| _dimstyle | Creates and modifies dimension styles |
| _-dimstyle | Creates and modifies dimension styles from command line |
| dimtad | Controls the vertical position of text in relation to the dimension |
| dimtdec | Sets the number of decimal places to display in tolerance values for the primary units in a dimension. |
| _dimtedit | Moves and rotates dimension text |
| dimtfac | Sets a scale factor used to calculate the height of text for dimension fractions and tolerances. |
| dimtfill | Controls the background of dimension text. |
| dimtfillclr | Sets the color for the text background in dimensions. |
| dimtih | Controls the position of dimension text inside the extension lines for all dimension types except ordinate. |
| dimtix | Draws text between extension lines. |
| dimtm | Sets the minimum (or lower) tolerance limit for dimension text when DIMTOL or DIMLIM is on. |
| dimtmove | Sets dimension text movement rules. |
| dimtofl | Controls whether a dimension line is drawn between the extension lines even when the text is placed outside. |
| dimtoh | Controls the position of dimension text outside the extension lines. |
| dimtol | Appends tolerances to dimension text. |
| dimtolj | Sets the vertical justification for tolerance values relative to the nominal dimension text. |
| dimtp | Sets the maximum (or upper) tolerance limit for dimension text when DIMTOL or DIMLIM is on. |
| dimtsz | Specifies the size of oblique strokes drawn instead of arrowheads for linear |
| dimtvp | Controls the vertical position of dimension text above or below the dimension line. |
| dimtxsty | Specifies the text style of the dimension. |
| dimtxt | Specifies the height of dimension text |
| dimtxtdirection | Specifies the dimension text viewing direction. |
| dimtzin | Controls the suppression of zeros in tolerance values. |
| dimunit | Obsolete. |
| dimupt | Controls options for user-positioned text. |
| _dimvertical | Vertical dimension |
| dimzin | Controls the suppression of zeros in the primary unit value. |
| dispsilh | Controls display of silhouette curves of solid objects in wire frame mode. |
| _dist | Measures the distance and angle between two points |
| distance | Stores the distance computed by the DIST command. |
| _distantlight | Creates a distant light |
| _divide | Places evenly spaced point objects or blocks along the length or perimeter of an object |
| divmeshboxheight | Sets the number of subdivisions for the height of a mesh box along the Z axis. |
| divmeshboxlength | Sets the number of subdivisions for the length of a mesh box along the X axis. |
| divmeshboxwidth | Sets the number of subdivisions for the width of a mesh box along the Y axis. |
| divmeshconeaxis | Sets the number of subdivisions around the perimeter of the mesh cone base. |
| divmeshconebase | Sets the number of subdivisions between the perimeter and the center point of the mesh cone base. |
| divmeshconeheight | Sets the number of subdivisions between the base and the point or top of the mesh cone. |
| divmeshcylaxis | Sets the number of subdivisions around the perimeter of the mesh cylinder base. |
| divmeshcylbase | Sets the number of radial subdivisions from the center of the mesh cylinder base to its perimeter. |
| divmeshcylheight | Sets the number of subdivisions between the base and the top of the mesh cylinder. |
| divmeshpyrbase | Sets the number of radial subdivisions between the center of the mesh pyramid base and its perimeter. |
| divmeshpyrheight | Sets the number of subdivisions between the two axis endpoints of the mesh sphere. |
| divmeshpyrlength | Sets the number of subdivisions along each dimension of a mesh pyramid base. |
| divmeshsphereaxis | Sets the number of subdivisions between the two axis endpoints of the mesh sphere. |
| divmeshsphereheight | Sets the number of subdivisions between the two axis endpoints of the mesh sphere. |
| divmeshtoruspath | Sets the number of subdivisions in the path that is swept by the profile of a mesh torus. |
| divmeshtorussection | Sets the number of subdivisions in the profile that sweeps the path of a mesh torus. |
| divmeshwedgebase | Sets the number of subdivisions between the midpoint of the perimeter of triangular dimension of the mesh wedge. |
| divmeshwedgeheight | Sets the number of subdivisions for the height of the mesh wedge along the Z axis. |
| divmeshwedgelength | Sets the number of subdivisions for the length of a mesh wedge along the X axis. |
| divmeshwedgeslope | Sets the number of subdivisions in the slope that extends from the apex of the wedge to the edge of the base. |
| divmeshwedgewidth | Sets the number of subdivisions for the width of the mesh wedge along the Y axis. |
| _donut | Draws filled circles and rings |
| donutid | Sets the default for the inside diameter of a donut. |
| donutod | Sets the default for the outside diameter of a donut. |
| _doughnut | Draws filled circles and rings |
| _downloadmanager | Reports the status of the of the current download. If the download was previously interrupted |
| _dragmode | Toggles display of objects while being dragged |
| dragp1 | Sets the regen-drag input sampling rate. |
| dragp2 | Sets the fast-drag input sampling rate. |
| dragvs | Sets the visual style while creating 3D solid primitives. |
| _drawingrecovery | Displays a list of drawing files that can be recovered after a program or system failure |
| _drawingrecoveryhide | Closes the Drawing Recovery Manager |
| _draworder | Changes the display order of images and other objects |
| draworderctl | Controls draw order functionality. |
| _dropgeom | Command to execute drop part of drag and drop |
| drstate | Drawing Recovery window state. |
| _dsettings | Specifies settings for Snap mode |
| _+dsettings | Specifies settings for Snap mode |
| _dsviewer | Opens the Aerial View window |
| _dtext | Displays text on screen as it is entered |
| _dvAutoViewObjects | Automatically selects linked graphical objects when their corresponding records are selected |
| _dvAutoViewRecords | Automatically selects linked records when their corresponding graphical objects are selected |
| _dvClearMarks | Clears all marks from the Data View window |
| _dvFind | Searches for a value in the Data View window |
| _dvFormat | Applies formatting to the Data View window display |
| _dview | Defines parallel projection or perspective views |
| _dvLink | Creates a link or a label |
| _dvLinkPlace | Turns Attached Label Creation mode on |
| _dvLinkToObject | Turns Link Creation mode on |
| _dvPageSetup | Data View window setup |
| _dvPlace | Turns Freestanding Label Creation mode on |
| _dvPrint | Prints the contents of the Data View window to the current system printer |
| _dvPrintPreview | Displays a preview image of a report in the Data View window |
| _dvPrintSetup | Data View print setup |
| _dvReplace | Searches for and replaces a value in the Data View window |
| _dvSettings | Specifies Data View and query options |
| _dvViewLObjects | Selects linked graphical objects when their corresponding records are selected |
| _dvViewLRecords | Selects linked records when their corresponding graphical objects are selected |
| _-dwfadjust | Allows adjustment of a DWF underlay from the command line |
| _dwfadjust | Allows adjustment of a DWF underlay |
| _-dwfattach | DWFATTACH displays prompts on the command line |
| _dwfattach | Attaches a DWF underlay to the current drawing |
| _dwfclip | Uses clipping boundaries to define a subregion of a DWF underlay |
| _dwfformat | Sets the default DWF format to either DWF or DWFx for the following commands: Publish |
| dwfframe | Determines whether the DWF frame is visible. |
| _dwflayers | Controls the display of layers in a DWF underlay |
| dwfosnap | Determines whether object snapping is active for DWF underlays which are attached to the drawing. |
| dwgcheck | Determines whether a drawing was last edited by a pro |
| dwgcodepage | Stores the same value as SYSCODEPAGE (for compatibility reasons). |
| _dwgconvert | Convert drawings into different file formats |
| dwgname | Stores the drawing name as entered by the user. |
| dwgprefix | Stores the drive/directory prefix for the drawing. |
| _dwgprops | Controls properties of existing objects |
| dwgtitled | Indicates whether the current drawing has been named. |
| _dxbin | Imports specially coded binary files |
| dxeval | Controls when data extraction tables are compared against the data source |
| _dxfin | Imports a drawing interchange file |
| _dxfout | Creates a drawing interchange file of the current drawing |
| dynconstraintdisplay | Displays or hides dynamic constraints. |
| dynconstraintmode | Displays hidden dimensional constraints when constrained objects are selected. |
| dyndigrip | Controls which dynamic dimensions are displayed during grip stretch editing. |
| dyndivis | Vertical dimension |
| dyninfotips | Controls the display of the cycling tips beneath the command input when dynamic input is on while manipulating grips |
| dynmode | Turns Dynamic Input features on and off. |
| dynpicoords | Controls whether pointer input uses relative or absolute format. |
| dynpiformat | Controls whether pointer input uses polar or Cartesian format. This setting applies only to a second or next point. |
| dynpivis | Controls when pointer input is displayed. |
| dynprompt | Controls display of prompts in dynmic input. |
| dyntooltips | Vertical dimension |